Home & DIY · Topic · 4 guides

Laundry

Find quick, practical help when your dryer or washing machine will not heat, spin, turn on, or drain. This Laundry section focuses on dryer and washing machine troubleshooting, with separate guides for each common problem.

All Laundry guides

Where to start

Choose the guide that matches what you see and hear, rather than starting with a part or tool. A dryer that does not heat calls for heat and airflow checks, while a dryer that runs but does not spin points you toward drum and drive checks. If the dryer gives no sign of life, follow the guide for a dryer that will not turn on. For a washer that stops with water in the drum, use the washing machine drain troubleshooting guide. In every case, work through the listed steps in order and note what you observe.

Take a minute to note the cycle, sounds, and any displayed message before you reset or unplug the appliance. A dead display is a different starting point from a running dryer that will not heat, and standing water needs a drain check before you test another cycle.

If several symptoms appear at once, use this order: no power or no response first, standing water next, then heat or drum movement. If a step does not apply to your machine, skip it and continue with the guide. If the problem remains after the listed fixes, stop and arrange qualified repair service.

Safety basics for this section

  • Power off: Unplug the dryer or washing machine before opening a panel, accessing a removable part, or checking a cord or plug. If you cannot unplug it safely, switch off its breaker.
  • Water off: For washing-machine drain work, close the water supply valves before opening the filter area or disconnecting a hose. Reconnect power and restore the water only after the area is dry and the parts are secure.
  • Stop for hidden damage: If you find a burn mark, melted cord, leaking supply hose, or water near electrical parts, do not continue. Disconnect power if safe, and call a qualified professional. Do not move either appliance if water is near the power connection.
  • No internal repairs: Do not work on internal electrical wiring, gas lines, gas valves, or gas burners. Call a licensed professional for those jobs.

How we keep these guides accurate

These guides use manufacturer instructions and official guidance as their source material. Each guide shows its last update date and revision history so you can see what changed and when.

Laundry: common questions

Which laundry problem should I troubleshoot first?

Match the guide to the main symptom. If the appliance does not respond, start with the no-power checks; if the washer holds water, address draining first; then work on heating or drum movement.

Should I unplug a dryer before checking why it will not heat?

Yes. Unplug the dryer before opening any access panel or touching a removable part, and switch off the breaker if you cannot unplug it safely. If the issue points to internal wiring or a gas burner, stop and call a licensed professional.

What can cause a washing machine not to drain?

A blocked filter, kinked drain hose, or clogged pump can keep water in the drum. Follow the drain guide in order, with the power off and the water supply closed before you open the filter area.

When should I stop troubleshooting and call someone?

Stop if you find burned wiring, a melted cord, a leaking hose, water near electrical parts, or a gas-related issue. Do not work on internal electrical wiring or gas components; call a licensed professional for repairs.

Other desks