Smart TVs
Use these Smart TV guides when your Roku or Fire TV Stick will not start, stream, or connect as expected. Start with the easiest checks, then work through the remaining fixes in order.
All Smart TVs guides
-
Roku Not Working? 8 Fixes to Try, Easiest First
Work through eight checks, from power cycling to a factory reset, and get your Roku streaming again without guessing at parts or settings.
-
Firestick Not Working? 8 Fixes to Try, Easiest First
Diagnose and fix a dead, unresponsive, no-signal, or remote-control Fire TV Stick using safe checks, reset steps, and clear troubleshooting paths.
Where to start
Match the symptom to the device before you change settings. A blank screen, missing picture, failure to start, or loss of connection can come from the streaming device, its power connection, the network, or the app you are trying to open. Note what happens from the moment you press the remote button: does the TV report no signal, does the device remain dark, or does setup continue? Also confirm that the TV is on the correct input. These quick observations can prevent you from repeating steps that do not apply.
- Fire TV Stick has no power, no picture, or will not finish starting: Follow the Firestick not working fixes. The order helps you complete simple checks before considering a more involved recovery step.
- Roku stays blank, will not connect, or does not reach its home screen: Work through the Roku not working fixes. Stop as soon as normal playback returns.
If the device turns on but video does not load, check whether the problem follows one app or affects every streaming service. Then use the matching guide for setup, connection, and recovery steps. Work in the listed order, and do not keep applying fixes after the issue is gone. If a guide suggests a reset, understand that you may need to sign in and set up the device again afterward.
Safety basics for this section
Power off before handling equipment. Unplug the Fire TV Stick, Roku, TV, or power adapter before you move it, clean it, or reconnect a loose cable. If the outlet or power connection is wet or damaged, do not use it.
- Keep water away. Do not place a streaming device or adapter near a sink, drink, or other liquid. If it gets wet, disconnect power and let it dry completely before using it.
- Use intact cables. Stop using a cable with visible cuts, bent pins, or damaged insulation. Do not tape over a damaged power cord.
- Stop if you see warning signs. If there is a burning smell, smoke, sparking, buzzing, or unusual heat, unplug the device if safe and call a licensed professional.
- Do not open the hardware. Leave internal repairs and wiring work to a licensed professional.
How we keep these guides accurate
We base the troubleshooting steps on manufacturer instructions and official guidance. Each guide shows its last update and revision history, so you can see what changed between revisions.
Smart TVs: common questions
Do I need to reset my Roku or Fire TV Stick first?
Usually not. Both guides place easier checks first, so follow the steps in order and use a reset only when the guide reaches that step. A reset can remove settings and may require you to sign in and set the device up again.
The TV turns on, but my Roku or Fire TV Stick does not. What should I check first?
Confirm that the streaming device has power and that the TV is set to the correct input. If the device still shows no picture or will not start, use the guide that matches Roku or Fire TV Stick.
Can I use the same fix for both Roku and Fire TV Stick?
The basic power and connection checks are similar, but the menus and recovery steps can differ. Use the guide for your device instead of mixing instructions between the two platforms.
What if my streaming device works but one app will not play?
Focus first on the app rather than resetting the whole device. If several apps also fail, continue with the matching device guide.