On this page
Quick answer
Most Roku problems come from a loose power connection, a dead remote battery, a failed network handshake, or a stuck app. Start by unplugging the power cord for a full minute, then replug it and restart the device. Next, check the remote batteries, confirm your Wi-Fi password, and update the software. If those steps fail, a factory reset will clear it.
At a glance
- Time
- 15–45 min
- Difficulty
- Easy
- You'll need
- Your Roku remote, a phone or tablet, your Wi-Fi password, a paper towel
- Cost
- Free for most fixes; a new remote battery if one is dead
- Works on
- Roku streaming players, Roku TVs, and the Roku mobile app
- Not covered
- Broken screens, damaged HDMI cables, or home internet outages
Why is my Roku not working?
A Roku is a small streaming box that runs apps on top of your television. It stores settings, cached app data, and network credentials in its own memory. When one of those things breaks, the box can still light up but refuse to do anything useful. That is why you often see a Roku that has power but “is not working.”
In most cases the fault sits in one of four places: the power path, the wireless connection, the remote’s infrared or Bluetooth link, or a single app that has hung. The hardware itself is rarely the problem. Roku players are built to run for years on the same basic setup, and the settings that cause trouble usually reset cleanly.
Another common source of confusion is the difference between “the Roku has no signal” and “the Roku is broken.” A Roku without an HDMI signal is often a cable or input-selection issue on the television, not a Roku problem at all. Similarly, a Roku stuck on the loading screen is usually the network, not the device. Identifying which symptom you have before you change anything saves you from unnecessary resets.
The fixes below run from easiest and most likely to least likely. Work them in order. If a step does not change the behavior, move to the next one rather than repeating it.
Before you start
Safety: Roku players run on low-voltage household electricity, but a fallen device or a wet power strip can still hurt. Unplug the player and any power strip from the wall before you move it, wipe it down, or open any compartment. Never touch internal wiring. If your setup involves rewiring a wall outlet or replacing a damaged power cord, call a licensed electrician.
If you plan to move a Roku near a kitchen or bathroom, keep the power cord and the device away from water sources and dry hands before handling plugs.
Have these ready before you begin:
- Access to your TV inputs, and the ability to switch the input source with the TV remote or the input button on the TV itself
- Your Roku remote, plus a fresh pair of batteries if you have them
- Your phone or tablet with the Roku app installed, if the remote is unresponsive
- Your home Wi-Fi network name and password
- A soft, dry cloth for cleaning ports and the vents
- The television’s HDMI input number, so you can return the TV to the right source
Step 1 Power cycle the Roku and the television
This is the single most effective fix for a Roku that has power but no picture, no sound, or a frozen screen. A power cycle clears the device’s memory of the current state, the same way restarting a phone clears a stuck app.
- Unplug the Roku player from the wall. If you use a power strip, unplug the whole strip.
- Leave it unplugged for a full minute. This gives the internal power supply time to drain.
- While you wait, unplug the television for thirty seconds and plug it back in, then turn the television on and let it finish booting.
- Plug the Roku back into the wall directly if you can, rather than through a power strip or extension cord.
- Turn the television on, press the Home button on your Roku remote, and choose the correct HDMI input.
How to tell whether it worked: the Roku home screen appears on the television within a minute or two, and the remote responds immediately. If you see the home screen but apps still misbehave, jump to the network and app steps below.
Step 2 Fix the remote so you can send commands
Many “Roku not working” reports are actually a dead remote. The player is fine, but nothing responds to the buttons. Replacing the batteries takes under a minute and solves a surprising share of these cases.
- Remove the battery cover from the back of the Roku remote. Slide it down and off, or pop it out, depending on your remote model.
- Take out the old batteries and note the orientation of the positive and negative ends in the compartment.
- Insert two fresh batteries, matching the markings inside the compartment.
- Slide the cover back on until it clicks.
- Point the remote at the Roku and press the Home button, then the Up arrow several times.
If the remote still does nothing, try a different set of batteries. Alkaline batteries are the most reliable choice; rechargeable batteries often send a weaker infrared or Bluetooth signal.
How to tell whether it worked: the Home button opens the Roku home screen, and the movement cursor follows your thumb on the television.
When the remote has no batteries but still won’t connect
Some Roku remotes pair with the player over Bluetooth rather than sending infrared. If the remote was already paired and the player was reset, the pairing is lost.
- Open the Roku mobile app on your phone or tablet and put it on the same Wi-Fi network as the Roku.
- In the app, tap the remote icon and follow the on-screen prompts to pair your physical remote with the player.
- Alternatively, hold the Home button on the remote for about five seconds, then release it, and wait for the player to reconnect.
How to tell whether it worked: the app’s virtual remote controls the Roku, and the physical remote starts responding again.
Step 3 Check the HDMI connection and select the right input
If the television shows a blue screen, a black screen, or a message about no signal, the problem is the link between the Roku and the television, not the Roku software. This step resolves most “Roku no signal” complaints.
- Turn off the television and unplug the Roku player from its power source.
- Unplug the HDMI cable from both the Roku and the television.
- Look at both ends of the cable. Check for bent pins, a loose fit, or debris inside the connector. Wipe the ends with a dry cloth and reconnect them firmly.
- If the cable has been routed around a tight bend or pinched behind the furniture, replace it with a new one. A damaged cable is common after moving a TV stand.
- Plug the Roku back in and turn it on.
- On the television remote, press the input or source button and choose the HDMI port the Roku is plugged into. Try the next input port if the picture does not appear.
How to tell whether it worked: the Roku home screen appears on the television. If you see the message about no signal on every input, continue to the reset step.
Roku TVs and the built-in player
If you own a Roku TV rather than a separate player, the streaming software is built into the television, and there is no separate box to unplug. Steps one and three still apply to the television itself: power cycle it and reseat the cables behind the set. On a Roku TV, the input path is labeled with the physical port names printed next to the HDMI connections on the back panel.
Step 4 Reconnect the Roku to your Wi-Fi network
A Roku that cannot reach your network will show a loading screen that never finishes, a checkmark next to the Wi-Fi icon that never completes, or an error about being unable to connect. Re-entering the network clears a saved but broken password.
- From the Roku home screen, select Settings, then Network, then Set Up Connection.
- Choose Wireless, or Wi-Fi, and pick your network from the list.
- Select the option to enter the password manually if your network does not appear or the list is long.
- Type your network password carefully. Passwords are case-sensitive, and a wrong password looks exactly like a hardware problem.
- Press Connect and wait for the network to show a checkmark.
- Check that the television is set to the correct date and time afterward, because the Roku pulls the correct clock from the network.
After a successful connection, open an app and confirm it loads. If it does, but the home screen still seems sluggish, move on to the software update step.
If the network is not listed at all
Your router may be set to a band your player cannot see, or the network may be hidden.
- Stand near the router and restart it by unplugging it for thirty seconds.
- On the Roku, choose the option to scan for networks again.
- If your network name does not appear, set the router to broadcast the 2.4 GHz band, or enter the network name and password manually.
How to tell whether it worked: the network status shows a checkmark and the clock on the home screen updates to the correct time.
Step 5 Restart or clear the stuck app
When a single app hangs on the loading screen but the rest of the Roku works fine, the fault is inside that app. Clearing its cache resets the app without deleting everything you have set up.
- From the home screen, open the app that is stuck.
- Wait about thirty seconds. Some apps are slow the first time they load after a fresh connection.
- Press the Home button to return to the home screen. If the app is listed under the app row, highlight it and press the Up arrow to open its options.
- Choose the option to close the app or check for updates, then reopen it.
- If the app still hangs, look for a Manage Applications section in Settings and clear the cache for that app.
- Install any pending update for the app, or move the app to the end of the row so it starts fresh.
How to tell whether it worked: the app opens and displays its menu rather than the spinning loading screen.
Step 6 Update the Roku software
Roku pushes software updates over the network. If yours has not connected in a long time, an update may be waiting, and a bug in older software can cause the exact symptoms you are seeing.
- Connect the Roku to the network if it is not already, then select Settings from the home screen.
- Choose System, then About, then Check for Updates, or select Update if an update is already flagged.
- Select Check Now and wait while the update downloads and installs.
- Keep the power connected until the player restarts on its own. Do not unplug it during this step.
- After the restart, confirm the home screen loads normally and that your apps still open.
How to tell whether it worked: the version number under About changes, and the home screen loads faster than before.
Step 7 Check for overheating and clean the vents
Roku players are small boxes that generate heat. When a device is stored in a closed cabinet, on carpet, or beside other electronics, it can throttle itself or shut down. The symptom is usually a Roku that works for a while and then stops.
- Unplug the Roku from power before moving or cleaning it.
- Move the player to an open surface with clearance on all sides. Do not stack anything on top of it.
- Use a dry, soft cloth or a soft brush to clear dust from the vents and the openings around the ports.
- Look for any sign of heat damage, discoloration, or a scorched smell on the power adapter. If you find one, stop and replace the adapter.
- Plug the Roku back in and test it again.
How to tell whether it worked: the player stays on and responds to the remote through a normal viewing session without shutting down.
Step 8 Factory reset the Roku
A factory reset wipes the player’s saved settings, network password, and app logins, and returns it to the setup screen. This is the right last step because it clears every stored setting, but it costs you some setup work afterward.
- On the Roku home screen, select Settings, then System, then Advanced System Settings.
- Choose Factory Reset and follow the on-screen prompts.
- Some remotes have a dedicated shortcut: press and hold the Home, Up, and Right buttons together for several seconds, then release them and follow the on-screen option.
- After the reset, the Roku shows a language screen. Pick your language, connect to your Wi-Fi network, and sign back into your account if you use one.
- Reinstall the apps you use and sign in again.
How to tell whether it worked: the setup screens appear, the device responds to the remote, and the home screen loads normally once you finish setup. If the same failure appears right after a clean reset, the hardware or the television is the more likely cause.
Symptom checker
| What you notice | Likely cause | Fix (step number) |
|---|---|---|
| Blank screen, no image at all | Wrong TV input selected | Step 3 |
| “No signal” message on the TV | HDMI cable loose, damaged, or unplugged | Step 3 |
| Roku has power but the remote does nothing | Dead or weak remote batteries | Step 2 |
| Home screen loads but apps will not open | Network password wrong or Wi-Fi dropped | Step 4 |
| Stuck on the loading screen with a spinner | Network connection incomplete | Step 4 |
| One app hangs, everything else works | App cache corrupted | Step 5 |
| Works for a while, then stops responding | Overheating in a closed cabinet | Step 7 |
| Picture appears but no sound | TV audio output set to the wrong device | Step 3 |
| Everything works after a restart, then fails again | Stored settings or software bug | Step 6, then Step 8 |
Mistakes that make it worse
- Plugging the Roku back in without waiting. A fast replug leaves the power supply in a half-reset state and the player may not boot properly the next time.
- Changing five settings at once. If you reset, reconnect to Wi-Fi, reinstall an app, and move the device in one sitting, you will not know which change helped.
- Leaving the player on an update while unplugging it. Interrupting a software update can leave the device stuck on the loading screen you were trying to fix.
- Resetting the Roku without noting your account details and app logins. A factory reset removes them, and signing back in is the longest part of the process.
- Running the HDMI cable under a rug or behind furniture where it gets pinched. A cable that looks fine can fail intermittently, causing the signal to drop in and out.
- Stacking the player under a television or inside a closed cabinet with no airflow. The box overheats quietly, and the symptom shows up later as random shutdowns.
- Repeatedly pressing every button on the remote during a freeze. More inputs do not clear a hang, and you may end up changing a setting you did not mean to change.
When to call a professional
- The wall outlet, power strip, or extension cord is scorched, cracked, warm to the touch, or smells burnt. Unplug it at the wall and have an electrician inspect the circuit.
- You need to add or move a receptacle, run new cable through a wall, or work inside a wall. Ask a licensed electrician.
- The HDMI port on the television is bent, cracked, or arcing, or the Roku’s connector has visible damage to the pins.
- The Roku reset cleanly, connects to the network, and still shows no picture on any input. That points to a failed television or a failed player, which needs service.
- The power adapter is damaged, or the cable is cut, pinched, or exposed. Replace the adapter rather than splicing a cable.
- Your home internet is down across every device, not just the Roku. Contact your internet provider before touching the player again.
How to keep it from happening again
- Leave clearance around all four sides of the player and keep it out of enclosed cabinets.
- Dust the vents and ports a few times a year with a dry cloth while the device is unplugged.
- Run the HDMI and power cables along a path where nothing presses on them.
- Keep the player’s software current; updates fix connection and app-loading bugs.
- Use alkaline batteries in the remote and replace them on a schedule you can remember, such as every six months.
- Once a year, confirm the network password still works and that the device updates the clock correctly, since both are early signs of a network problem.
Frequently asked questions
Why does my Roku say no signal?
The television is on the wrong input, or the HDMI cable between the Roku and the television is loose, damaged, or plugged into a different port than the one you selected. Reseat both ends of the cable, then cycle the input buttons on the TV remote until you find the one showing the Roku home screen.
My Roku remote stopped working. Do I have to replace it?
Usually not. Replace the batteries first, since weak or dead batteries cause most remote failures. If the remote still does nothing, pair it again through the Roku mobile app on your phone while both are on the same Wi-Fi network.
Why is my Roku stuck on the loading screen?
The player is usually waiting on your network, or a single app is hung. Restart the network connection in the Roku's settings, then clear the app's cache from the app's options menu. Update the software as well, because loading bugs are often fixed in updates.
Will a factory reset delete my subscriptions and passwords?
It removes the device's saved settings and sign-ins, but it does not cancel any subscription you have with a streaming service. You will need to sign back into your account and reinstall the apps you use after the reset.
Do I need to unplug the Roku from the wall for a full minute?
Yes, for the power cycle to work. A quick unplug leaves residual power in the internal supply, and the player may keep the same stuck state. Set a timer and leave it disconnected for a full minute before plugging it back in.
My Roku worked yesterday and stopped today. What changed?
Check for an automatic software update that may be waiting to install, and check whether your network password or router settings changed. If nothing changed on your end, power cycle the player and the television first, since a corrupted setting often clears on its own that way.
What this guide is based on
- Manufacturer use-and-care and support documentation for the device
Revision history
- Updated and re-checked against sources.
- First published.
Did this fix it?
Thanks. Glad it's sorted.
Sorry it's still not right. Recheck the symptom checker above, or tell us what you're seeing.