On this page
Quick answer
A hotspot usually fails because the sharing phone has no mobile data, a temporary radio state is stuck, or a saved network is out of date. First, restart the phone, verify cellular data works, toggle the hotspot, then forget the network on the second device and reconnect with the current password.
At a glance
- Time
- 15–45 min
- Difficulty
- Easy
- You'll need
- Both devices, hotspot password, charging cable, and carrier account access
- Cost
- Free for most fixes; repair if hardware is damaged
- Works on
- Android and iPhone personal hotspots, USB tethering, and Bluetooth tethering
- Not covered
- Internal radio repairs, carrier outages, or fixed wiring problems
Why does a personal hotspot stop working?
A personal hotspot turns your phone into a Wi-Fi access point. The second device joins that local network, but its internet traffic still has to pass through the sharing phone and your cellular data service. The hotspot, cellular connection, and receiving device must all work together.
Most problems are temporary: a radio state that did not reset, a dead cellular-data connection, a VPN or data restriction, or an old network name and password saved on the receiving device. Less often, a damaged port, incomplete software update, or carrier-side problem blocks sharing.
“Connected” usually means the second device sees the hotspot. “Connected without internet” points to a different layer: the phone may be sharing Wi-Fi while cellular data, name resolution, or routing is failing. Start by confirming that the phone has internet on its own, then work through the receiving device.
Before you start
Safety first: Turn the phone off and unplug any charger before you change a charging cable. If a task involves a wall outlet or fixed wiring, switch off the breaker first and call a licensed electrician for wiring repairs. Do not adjust a gas line, valve, or burner; call a licensed professional instead.
You need the sharing phone, its passcode, a second phone or computer, the current hotspot name and password, and access to your carrier account. Do not reset the phone until you have checked mobile data and recorded any Wi-Fi network names you use.
- The phone that will share its connection
- A second phone, tablet, or computer for testing
- The hotspot password shown on the sharing phone
- Your carrier account sign-in, if mobile data is not working
- A data-capable USB cable for the tethering test
Step 1 Restart the phone and reset the hotspot switch
A temporary radio or software state can remain active after a network change, an update, or Airplane Mode. Turning the hotspot off and restarting the phone resets that state without removing your files, apps, or saved Wi-Fi networks.
- Turn the personal hotspot off. On iPhone, open Settings > Cellular > Personal Hotspot. On Android, open Settings > Network and internet > Hotspot and tethering. Set the hotspot switch off.
- Turn the phone off completely with the power button. Wait until the screen goes dark, then turn the phone on and open its home screen.
- Confirm Airplane Mode is off. Turn on mobile data if your phone’s cellular menu shows it disabled.
- Turn the hotspot on again. Confirm the network name, password, and connected-device status appear on the sharing phone.
- On the second device, open its Wi-Fi list, select the hotspot, and enter the password exactly as shown. Capital and lowercase letters matter.
- Open a web page. If it loads, the temporary radio state was likely the problem.
How to tell it worked
Success means the second device joins the network and loads a web page, not merely that it shows “connected.” If the network still does not appear, continue with the mobile-data and restriction checks.
Step 2 Confirm that the phone has working mobile data
The hotspot shares cellular data; it does not create a separate internet connection. If the sharing phone cannot open a page on its own, the carrier signal, data plan, SIM or eSIM, or account status is the likely cause.
- Check the phone’s display for the carrier name and signal bars. A missing carrier label can indicate a service or SIM problem, although the indicator varies by phone.
- Confirm mobile data is enabled. On iPhone, check Settings > Cellular > Cellular Data. On Android, check Settings > Network and internet > Mobile data.
- Turn off Data Saver on Android or Low Data Mode on iPhone for the test. These settings can limit or slow shared traffic.
- With the hotspot off, open the phone’s browser and try to load a page. You can also check whether weather or another app reports a mobile-data connection.
- Sign in to your carrier’s app or account page. Confirm the line is active and that the plan has available data and no unpaid balance.
- Check the preferred network setting. Leave it on automatic unless your carrier has instructed you to select a specific network.
- If the carrier name is missing, power the phone off before removing a physical SIM card. Reinstall the card, restart the phone, and check again. Do not delete or reset an eSIM yourself; contact your carrier about it.
- If the phone still has no mobile data, contact your carrier. Software resets will not repair a line that the carrier has suspended or a network that is unavailable.
Android and iPhone data menus
On Android, look for Mobile data, Data Saver, and app data controls. On iPhone, look for Cellular Data and Cellular Data Options. Menu labels vary by phone and software version, so use the Settings search if a listed option is missing.
How to tell it worked
The phone’s browser and apps should load a page while the hotspot is off. After that, turn the hotspot on and test again. If the phone has internet but the second device does not, continue to Step 3.
Step 3 Turn off restrictions that can interfere with sharing
VPN software, private DNS settings, restricted-data modes, and device-management policies can affect the sharing phone’s traffic. These settings often work normally for the phone itself while causing problems for connected devices.
- Disconnect any VPN on the sharing phone, then turn the hotspot off and on again. Reconnect the second device and test a page.
- On Android, check the Private DNS setting. If you entered a custom DNS server, temporarily return it to Automatic for the test, then restore your organization’s setting afterward.
- Confirm that Low Data Mode, Data Saver, or restricted background-data options are not limiting the connection.
- Check whether the phone has a work, school, or other managed profile. An administrator may be allowed to disable tethering. Do not remove a required profile without permission.
- Check for a parental-control or security app that blocks hotspot use. Disable its hotspot restriction temporarily if you manage the app yourself.
- Restart the sharing phone and the second device. Connect again with the current hotspot password.
- Try loading a website by name and then by its numeric address. If only numeric addresses work, the local connection exists but name resolution is failing.
How to tell it worked
The second device should load pages by name after reconnecting. If the failure follows every Wi-Fi network but cellular data works on the phone, treat it as a phone-side hotspot problem rather than a saved-network problem.
Step 4 Forget the old hotspot and connect again
A receiving device stores the hotspot name, password, and security settings. If you changed the password or the phone recreated the hotspot, the device may keep trying an outdated profile. “Connected” can also persist because the device is using mobile data instead of the hotspot.
- On the sharing phone, confirm the exact network name and current password. Do not rely on a password saved earlier.
- On the receiving phone, open its Wi-Fi settings, select the hotspot network, and choose Forget This Network or Forget. On Android, tap the connected network and choose Forget.
- Turn the receiving device’s Wi-Fi off, wait briefly, and turn it back on. Restart the device if the old network keeps returning.
- If the receiving device has its own mobile data, temporarily turn it off. This prevents the device from quietly using its cellular connection while you test the hotspot.
- Select the hotspot again and enter the current password. Allow the network to finish connecting before opening several pages.
- Try a second phone or computer. If only one receiving device fails, focus on that device’s saved network, security mode, or Wi-Fi settings.
- If the device offers automatic switching between Wi-Fi and mobile data, turn that feature off during the test.
Computers and other receiving devices
On a computer, remove the hotspot from the list of saved networks and choose it again as if it were a new network. Some systems reconnect automatically to a stronger saved network, so confirm that the computer is using the hotspot connection you just selected.
How to tell it worked
The receiving device should join without an authentication error and load a page while its own mobile data is off. If it joins but still cannot reach the internet, return to Step 2.
Step 5 Refresh the password, security mode, and Wi-Fi band
Some devices cannot join a WPA3-only network, and some older or low-cost receivers handle the available Wi-Fi bands differently. A nearby device is more likely to detect the 2.4 GHz band, while a device that refuses every password may be using an outdated security setting.
- Change the hotspot password to a temporary combination of letters and numbers. Avoid spaces and unusual characters when another device repeatedly rejects the password.
- Keep wireless security enabled. If your phone lets you choose WPA2 or WPA3, try WPA2 when a compatible but older receiving device cannot join.
- If your phone offers separate 2.4 GHz and 5 GHz hotspot networks, select the 2.4 GHz option for the first connection test with an older or unfamiliar device.
- Move the second device closer to the phone and remove a thick case temporarily if the network is not visible.
- Forget the hotspot on the receiving device again, then reconnect with the new password.
- Disable automatic Wi-Fi switching features on the receiving device, including options labeled Smart Network Switching, Wi-Fi Assistant, or similar.
- Check the number of connected devices if your phone displays a limit. Disconnect unused devices and try again.
How to tell it worked
The second device should see the network, accept the new password, and load a page. If a different device works with the same hotspot, the problem is with the original receiver’s settings or compatibility.
Step 6 Test USB tethering
USB tethering bypasses the phone’s Wi-Fi hotspot while still using its mobile data. If it works, the cellular connection and carrier service are functioning, so the problem is limited to hotspot discovery, Wi-Fi security, or the saved network.
- Turn the phone off and unplug any charger before changing the cable.
- Connect the phone to a computer with a data-capable USB cable. A charge-only cable cannot carry the tethering connection.
- On Android, open Settings > Network and internet > Hotspot and tethering and turn on USB tethering. On iPhone, connect the phone and open Settings > Personal Hotspot.
- If the computer displays a trust prompt, review it and approve the connection when you recognize the computer.
- Open a browser on the computer and try to load a page.
- If the connection works, use USB tethering while you continue checking the Wi-Fi hotspot settings.
- If USB tethering also fails, return to Step 2. The cellular connection, plan, SIM, or carrier service is the more likely cause.
- When finished, turn off USB tethering before disconnecting the cable. If the port or cable shows damage, stop using it.
USB-C and Lightning connections
The connection process is the same with USB-C and Lightning cables, but some cables support charging only. Use a cable that your phone and computer both support for data, and do not force a connector that does not fit comfortably.
How to tell it worked
The computer should get a network adapter labeled with the phone’s name or a tethering designation and should be able to open a page. That result isolates the problem to the Wi-Fi hotspot path.
Step 7 Test Bluetooth tethering
Bluetooth tethering provides another way to use the phone’s cellular data without the hotspot’s Wi-Fi radio. It can confirm that shared internet access works when the Wi-Fi hotspot itself is failing.
- Pair the second device with the phone through the Bluetooth settings on both devices.
- On Android, open Settings > Network and internet > Hotspot and tethering and turn on Bluetooth tethering. On iPhone, open Settings > Personal Hotspot and turn on Bluetooth.
- Make sure Bluetooth is turned on and the receiving device is paired.
- Open a browser on the receiving device and test a page.
- If the connection works, you can continue using it temporarily while checking the Wi-Fi hotspot. Turn it off when finished.
- If it does not work, return to Step 2 and verify the phone’s own mobile data.
How to tell it worked
A paired device should gain internet access through the phone without joining a Wi-Fi network. If Bluetooth works but Wi-Fi does not, update the phone software and check the Wi-Fi hotspot settings in Steps 5 and 8.
Step 8 Update the software and reset network settings as a last resort
Outdated software can leave the hotspot driver, Wi-Fi radio, or carrier settings in an inconsistent state. A network reset can repair those settings, but it removes saved connections and may disconnect paired devices, so complete the simpler checks first.
- Back up important information, then check for a phone software update through the built-in Settings menu. Install available updates before changing other settings.
- Install any carrier settings update offered through the phone’s notification area or carrier app, then restart the phone.
- On iPhone, open Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. Confirm the reset.
- On Android, open Settings > System > Reset options and choose Reset Wi-Fi, mobile and Bluetooth. Some versions place Reset options elsewhere, so use the Settings search if needed.
- Reconnect to your usual Wi-Fi networks as needed. Set the phone’s preferred network back to automatic unless your carrier instructed otherwise.
- Turn on mobile data, start the hotspot, and reconnect the second device with the current password.
- Test the hotspot with another phone if possible. If every receiving device fails while mobile data works, the hotspot software or radio may be faulty.
- Contact the phone manufacturer or an authorized repair service if the hotspot still will not start after the reset. Do not open the phone yourself.
What the reset removes
A network reset normally leaves photos, apps, and documents alone, but it removes saved Wi-Fi networks and may remove Bluetooth pairings and other connection settings. You will need to enter network passwords and reconnect paired devices again.
How to tell it worked
The hotspot should appear, accept the second device, and provide internet access. If it fails on every device after the reset, stop repeating the same steps and arrange service or carrier support.
Symptom checker
| What you notice | Likely cause | Fix (step number) |
|---|---|---|
| The hotspot switch will not stay on | Stuck phone state, restriction, or managed-device policy | Steps 1, 3, and 8 |
| The second device cannot see the hotspot | Airplane Mode, weak signal, hidden network, or band compatibility | Steps 1 and 5 |
| The password is rejected | Outdated saved credentials or a recent password change | Steps 4 and 5 |
| Connected, but web pages do not open | No mobile data, VPN, DNS, or routing restriction | Steps 2, 3, and 4 |
| One device works and another does not | Saved-network, security-mode, or Wi-Fi-band mismatch | Steps 4 and 5 |
| USB tethering also has no internet | Cellular service, plan, SIM, eSIM, or account issue | Steps 2 and 8 |
| The hotspot works and then stops | Overheating, power state, or interrupted data service | Steps 1, 2, and 8 |
| Pages open by address but not by name | A DNS or private-DNS setting is interfering | Steps 3 and 4 |
| The hotspot works at one location but not another | Carrier coverage or local network availability | Steps 2 and 8 |
Mistakes that make it worse
- Resetting network settings before confirming that the phone has mobile data.
- Leaving a VPN, Data Saver, Low Data Mode, or custom DNS setting active during every test.
- Assuming “connected” proves the second device has internet access.
- Keeping an old saved hotspot password and repeatedly retrying it.
- Deleting a SIM, eSIM, or managed work profile before contacting the carrier or administrator.
- Forcing a damaged charging port or using a charge-only cable for USB tethering.
When to call a professional
- If a wall outlet, receptacle, breaker, or fixed wiring is involved, switch off the breaker and call a licensed electrician. Do not repair internal wiring yourself.
- Call a licensed professional.
- If the phone is wet, unusually hot, swollen, or has a damaged charging port, stop charging it and keep it away from heat and flammables until a qualified repair service can inspect it.
- If the phone has mobile data but the hotspot fails after a network reset on every receiving device, contact the manufacturer or an authorized repair service.
- If the carrier cannot restore service, or a SIM or eSIM needs replacement, contact the carrier. Do not delete or reinstall an eSIM on your own.
- If a work or school administrator controls tethering, ask the administrator to review the device policy.
How to keep it from happening again
- Install phone software updates when they are offered.
- Check your carrier account for plan changes, data usage, and service notices.
- Keep the hotspot password private and change it after anyone unexpected connects.
- Use WPA2 or WPA3 security rather than leaving the hotspot open.
- Keep the phone dry, ventilated, and away from heat while using the hotspot.
- Restart the phone after a network switch or failed connection instead of repeatedly changing hotspot settings.
Frequently asked questions
Why does my hotspot say connected but have no internet?
The second device may be connected only to the phone’s local Wi-Fi network. Check that the sharing phone has working mobile data, disable VPNs and data restrictions for the test, and reconnect the second device with the current password.
Does a personal hotspot use the same mobile data as my phone?
Yes. A personal hotspot sends its connected devices’ traffic through the phone’s cellular data. Browser use, streaming, and app updates on the receiving device can also count toward your plan.
Why can’t my second device see the hotspot?
Check that Airplane Mode is off and the hotspot is visible on the sharing phone. Move the devices closer, forget the old network, and try the 2.4 GHz option if your phone offers separate bands.
What should I try if my Android hotspot will not turn on?
Restart the phone, confirm mobile data works, and toggle the hotspot again. If it still fails, check managed-device restrictions and update the software before resetting network settings.
Will resetting network settings erase my apps and photos?
A network reset generally does not erase apps or photos. It does remove saved Wi-Fi networks and may remove Bluetooth pairings and other connection settings, so reconnect your devices afterward.
Can I keep other people from using my hotspot?
Turn off the hotspot when you are not sharing it and keep its password private. If an unfamiliar device appears in the connected list, disconnect it and change the password.
What this guide is based on
- Apple iPhone User Guide support.apple.com/guide/iphone
- Google Android Help support.google.com/android
Revision history
- Updated and re-checked against sources.
- First published.
Did this fix it?
Thanks. Glad it's sorted.
Sorry it's still not right. Recheck the symptom checker above, or tell us what you're seeing.