On this page

Quick answer

Most charging failures come from a loose or dirty port, a bad cable or adapter, heat, a frozen iPhone, or charging settings. First, reconnect the cable, inspect the port, try a known-good charging setup, and restart the phone. Update the software and stop charging if the iPhone is hot or wet.

At a glance

Time
15–45 min
Difficulty
Easy
You'll need
iPhone, compatible cable and adapter, dry brush or lint-free cloth, and another outlet
Cost
Free for most fixes; replacement parts and professional repair cost extra
Works on
iPhones with USB-C or Lightning wired charging
Not covered
Internal port, battery, or logic board repair; liquid damage; gas or outlet wiring

Why does an iPhone stop charging?

iPhone won’t charge? An iPhone needs a complete charging path. Power starts at the wall outlet or another USB power source, moves through the adapter and cable, enters the charging port, and is accepted by the phone’s charging system. If any link in that path fails, the phone may show no charging symbol at all.

iPhone not charging when plugged in? Common causes include lint or debris in the port, a loose connector, a damaged cable or adapter, an outlet that is not working, a phone that is too hot or too cold, a frozen screen, charging settings, or iPhone software that needs attention. A worn charging port, damaged battery, or internal charging component can also prevent charging.

The symptom helps narrow the cause. No symbol usually points to the connection, port, or an on-screen warning. A symbol with no battery increase points more toward temperature, a paused charging feature, software, or the battery. A connector that works only when held at an angle usually means the port is worn or obstructed.

Before you start

Charging equipment can heat, and a damaged cable or port can create a fire or shock risk. Before you inspect anything attached to power, unplug the charging adapter from the wall and disconnect the cable from the iPhone. Keep the iPhone, cable, adapter, and outlet dry. If any part becomes wet, do not reconnect it. If an outlet is wet or damaged, switch off its breaker if you can reach it safely and call a licensed electrician.

Do not open the iPhone, probe the charging port with metal, or work on internal wiring. Never use a hair dryer, radiator, microwave, or other heat source to dry the phone.

Have these items ready before you begin:

  • Your iPhone and its current charging cable and adapter
  • A compatible cable and adapter that you know work with another device
  • Another safely accessible wall outlet
  • A dry, soft-bristled brush or lint-free cloth
  • A computer and backup storage if you may need to erase the iPhone

Step 1 Reconnect the charging setup and confirm the charging indicator

A connector can look inserted while still making poor contact. Reconnecting both ends is the quickest way to rule out a loose connection and confirm whether the iPhone detects power.

  1. Plug your normal charging adapter into a wall outlet.
  2. Connect the charging cable directly to the iPhone without a hub or dock.
  3. Push the connector straight in until it seats. Do not wiggle it or use force.
  4. Wake the display by pressing the side button or, on an iPhone with a Home button, the Home button.
  5. Watch for the charging symbol near the battery. It may appear briefly before the display changes.
  6. If no symbol appears, disconnect the cable from both the iPhone and adapter, then reconnect it once more.

If your iPhone uses USB-C

A USB-C plug fits in either orientation, but the cable and adapter must be compatible with the port. If charging works in only one orientation, inspect both the plug and port for debris. Stop if the plug feels loose inside the port.

If your iPhone uses Lightning

The narrow Lightning connector fits only one way. Look for the small contact section on the plug and align it with the slot before inserting it. If it does not slide in easily, do not force it.

A dark screen does not always mean charging failed. An iPhone can charge while powered off, so check again after waking it or reconnecting the cable.

How to tell it worked: The iPhone recognizes the connection if a charging symbol appears and the battery later shows an increase. The percentage readout may not change immediately, so check it again after leaving the phone connected.

Step 2 Clean the charging port gently

Debris can collect inside a charging port and keep the connector from reaching the contacts. Cleaning the port is safe when the iPhone is off and disconnected from power, but metal objects and liquid can cause damage.

  1. Unplug the adapter from the wall and disconnect the cable from the iPhone.
  2. Power off the iPhone.
  3. Hold the port under a bright light and look for lint, dust, or another visible obstruction.
  4. Use a dry, soft-bristled brush or dry lint-free cloth to loosen debris at the edge of the port.
  5. Remove only loose debris. Do not push material deeper or insert a pin, clip, screwdriver, or other metal object.
  6. Reconnect the cable and adapter, then wake the iPhone and check for the charging symbol.

For a USB-C port

Inspect the inside of the oval opening, its edges, and the metal tip of the cable. Check that the connector sits straight without tilting when you plug it in.

For a Lightning port

Inspect the narrow socket and both sides of the cable tip. Lint packed to one side can make the connector appear loose or charge only at an angle.

Do not use liquid, alcohol, compressed air, or a metal tool inside the port. If the iPhone shows a liquid or foreign-object warning, stop charging it and follow Step 5.

How to tell it worked: Debris removal is successful if the connector now seats securely and the charging symbol returns. If the port still feels loose, moves sideways, or requires the cable to be held in place, stop using it and arrange professional repair.

Step 3 Test a different cable, adapter, and outlet

Cables and adapters fail from bending, pinching, corrosion, or internal damage. Replacing each part of the charging setup one at a time is an effective way to identify the failed component without opening the iPhone.

  1. Unplug the current cable and adapter.
  2. Connect a compatible cable that you know works with another device.
  3. If the cable still fails, connect a compatible adapter that you know works.
  4. Try a different safely accessible wall outlet while keeping the same cable and adapter.
  5. Reconnect the iPhone and check for the charging symbol and any warning message.
  6. If another iPhone with the same connector type is available, test the cable and adapter with it separately.
  7. Keep using the combination that works and replace the cable or adapter that failed.

If your iPhone uses USB-C

Use a USB-C-to-USB-C charging cable with a compatible USB-C power adapter. If your setup starts with a USB-A plug, use the appropriate USB-A-to-USB-C cable or adapter. Never force a different connector into the port.

If your iPhone uses Lightning

Use a compatible Lightning charging cable and USB power adapter. The connector should enter fully without force, and the cable should show no cuts, bent plugs, discoloration, or exposed wiring.

A computer USB connection may behave differently from a wall adapter because it supplies a different amount of power. If the iPhone charges from one source but not another, keep using the source that works.

How to tell it worked: If the iPhone charges with a different cable, adapter, or outlet, the replaced part or outlet was the problem. If a known-good setup still fails, continue with the port, restart, temperature, and software checks.

Step 4 Restart the iPhone

A restart can clear a frozen interface, stuck charging display, or software process that prevents the phone from recognizing power. Restart before erasing any data or settings.

  1. Save any work in progress.
  2. Open Settings, then choose General, Reset, Reset, and Restart.
  3. If you cannot reach the Settings menu, use the side or top power control to turn the iPhone off, then turn it back on.
  4. After the restart finishes, reconnect the charging cable and adapter.
  5. Wake the screen and check for the charging symbol. If the screen remains frozen, use the appropriate force-restart sequence below.

On an iPhone with a side button and no Home button

Quickly press and release Volume Up, quickly press and release Volume Down, and then hold the side button until the Apple logo appears. Release the button when you see the logo.

On an iPhone with a Home button and a side button

Hold the side button and Volume Down together until the Apple logo appears. Release both buttons when the logo becomes visible.

On an iPhone with a Home button and a top button

Hold the Home button and top button together until the Apple logo appears. Release both buttons when the logo becomes visible.

How to tell it worked: A successful restart makes the display and controls responsive again. If charging starts after the restart, continue using normal charging habits. If the screen stays frozen, force-restart it once and then continue with the other checks.

Step 5 Remove the case and accessories, then test another charging method

A case can press against the cable or trap debris near the port. Connected accessories can also interfere with normal charging. Testing wireless charging, when available, helps separate a wired-port problem from a broader charging problem.

  1. Unplug the charging cable from the iPhone.
  2. Remove the case and disconnect accessories that are not needed for charging.
  3. Inspect the case’s port opening for fabric, lint, or a raised edge that could hold the connector away from the iPhone.
  4. Reconnect the cable directly to the iPhone without the case.
  5. If your iPhone supports wireless charging, place the center of it on a compatible wireless charging pad.
  6. Wait for the wireless charging indicator and check whether the iPhone begins charging.
  7. If a liquid, foreign-object, or accessory warning appears, stop using the charging setup and follow the warning guidance below.

If a liquid or foreign-object warning appears

Disconnect the cable and turn off the iPhone. Let every part dry completely at room temperature, and do not use rice, heat, or a powered tool to speed drying. Do not charge the phone again until the warning clears and the port is fully dry. If the warning remains, arrange service.

If you are testing wireless charging

Remove any case that blocks the charging coil or magnetic attachment area. Make sure the wireless charger is connected to power and that the iPhone is centered. If it charges wirelessly but not through the port, the battery and display can accept power, but the port or wired setup still needs checking.

How to tell it worked: Wired charging returning after removing the case points to pressure or trapped debris. Successful wireless charging narrows the issue to the cable, port, or wired accessories. If neither method works, continue through the remaining steps.

Step 6 Bring the iPhone back to a safe temperature

An iPhone can pause charging when it becomes too hot or too cold. Heat can also build up when the phone is charging under bedding, inside a tight case, or in direct sunlight.

  1. Unplug the charging cable.
  2. Move the iPhone to a dry, ventilated area away from sunlight, heaters, appliances, and cold outdoor conditions.
  3. Remove the case so heat can dissipate normally.
  4. Place the iPhone on a hard, flat, nonflammable surface rather than a bed, pillow, sofa, or lap.
  5. If the phone is cold, let it warm gradually at room temperature. Do not use external heat.
  6. Wait until the temperature warning clears and the phone is no longer unusually warm, then reconnect the cable.

If the iPhone is unusually hot without charging, feels swollen, or causes the case to warp, unplug it and stop using it. Do not open or press on the phone; arrange professional service.

How to tell it worked: If charging resumes after the phone reaches a safe temperature, heat or cold was interrupting the charging process. Keep the phone uncovered while it charges and avoid locations where heat can build up.

Step 7 Update iOS and review charging settings

Software problems and charging features can interrupt an otherwise working connection. Installing available updates and temporarily changing charging-related settings can clear some software-related charging failures.

  1. Back up the iPhone if possible, and use another power source if you can.
  2. Open Settings, then choose General and Software Update.
  3. Download and install any available update. Do not turn off the iPhone during the installation.
  4. Open Settings and choose Battery Health and Charging.
  5. If Optimized Battery Charging is on, turn it off temporarily so you can check ordinary charging behavior.
  6. Restart the iPhone, reconnect the cable and adapter, and check the charging symbol and battery level.

If the update will not install

Keep the iPhone connected to a working power source, check your network connection, and try the Software Update screen again. If the update repeatedly stops, continue using the restart and wired-charging checks while arranging service.

If your settings do not show Battery Health and Charging

Skip that setting rather than looking for a software update. You can still review other battery settings, restart the iPhone, and test the charging setup again.

How to tell it worked: The fault is software-related if charging starts after the update, restart, or settings change. If the same setup still fails, the remaining likely causes are the port, battery, or an internal charging component.

Step 8 Back up and erase the iPhone for a clean test

An erase is the last software reset because it removes the iPhone’s data and settings. It can help identify a serious software conflict, but it will not repair a damaged port, cable, battery, or internal component.

  1. Back up the iPhone to iCloud or a computer before erasing it.
  2. Open the backup destination and confirm that a recent backup completed successfully.
  3. On most versions, open Settings, choose General, and choose Transfer or Reset iPhone.
  4. Choose Erase All Content and Settings, enter the iPhone passcode if requested, and confirm the erase.
  5. Complete the initial setup without restoring old data, then test the charging setup.
  6. If charging works, restore the backup. If it does not work, leave the iPhone erased until service is arranged.

If your iOS uses the older reset menu

Open Settings, choose General and Reset, and select Erase All Content and Settings. The exact menu can vary, but the option that removes all content and settings must be used for a clean test.

Erase All Content and Settings deletes the information on the iPhone. Stop if you cannot confirm that your important data has been backed up.

How to tell it worked: If the clean iPhone charges normally, a software or settings conflict was likely involved. If it still does not charge with a known-good setup, stop troubleshooting and arrange an inspection of the charging port and internal hardware.

Symptom checker

What you notice Likely cause Fix (step number)
No charging symbol and nothing happens Loose connector, dirty port, failed cable, or failed adapter Steps 1, 2, and 3
The charging symbol appears briefly and disappears Cable or adapter is not supplying power consistently Step 3
The phone charges only when the cable is held at an angle Worn or obstructed charging port Step 2; professional repair if it persists
It charges with a different cable The original cable is damaged Step 3
It charges from another outlet but not the original one Original outlet or power source is not working Step 3; call an electrician if the outlet is unsafe
It charges wirelessly but not through the cable Port, cable, or wired charging accessory Steps 2, 3, and 5
The phone becomes warm and charging stops Temperature protection Step 6
The phone is cold and will not charge Temperature protection Step 6
The screen is frozen or will not restart normally Stuck software or interface Step 4
The charging symbol stays visible but the battery does not increase Paused charging setting, temperature issue, software fault, or battery problem Steps 6, 7, and 8
A liquid or foreign-object warning appears Moisture or debris in the port Step 5; professional service if it remains

Mistakes that make it worse

  • Forcing the cable into the port or repeatedly bending it to make it connect.
  • Using a pin, clip, screwdriver, compressed air, alcohol, or another liquid inside the charging port.
  • Continuing to charge an iPhone that is unusually hot, swollen, wet, or displaying a liquid warning.
  • Leaving a frayed cable connected to power or repeatedly forcing a connector into a loose port.
  • Installing a software update while the battery is nearly depleted, which can interrupt the installation.
  • Erasing the iPhone without confirming that your important information has been backed up.

When to call a professional

  • The charging port is loose, bent, discolored, or physically damaged.
  • A known-good cable, adapter, and outlet do not charge the iPhone after you restart it and complete the other checks.
  • The phone charges only when the cable is held at a particular angle or pressed tightly into the port.
  • The battery appears swollen, the phone becomes unusually hot, or charging repeatedly stops with a temperature warning.
  • A liquid or foreign-object warning remains after the iPhone and charging parts have fully dried.
  • A software update repeatedly fails, or the iPhone cannot complete a clean erase and setup.
  • An outlet is hot, sparking, discolored, loose, or smells burnt. Switch off the circuit’s breaker and call a licensed electrician; do not remove outlet covers or work on outlet wiring yourself.

How to keep it from happening again

  • Use sound, compatible cables and adapters without exposed wiring, sharp bends, or crushed plugs.
  • Keep the charging port and case opening free of lint and pocket debris.
  • Avoid bending or pulling the cable at the connector; support it where it leaves the iPhone.
  • Keep the iPhone away from water and moisture, and stop charging if any part becomes wet.
  • Charge on a hard, open surface and avoid covering the phone while it charges.
  • Keep the phone within a comfortable temperature and avoid direct sunlight or enclosed vehicles.
  • Install available software updates and restart the iPhone if the charging display becomes stuck.
  • Before storing the iPhone for a long period, charge it to a normal level and keep it in a dry, moderate-temperature location.

Frequently asked questions

Why is my iPhone not charging even with a new cable?

A new cable rules out one part of the charging path, but the adapter, outlet, port, or software may still be responsible. Test a known-good adapter and outlet, inspect the port, and restart the phone. If those steps fail, the iPhone may need professional inspection.

Can I clean the charging port with compressed air, alcohol, or a pin?

Do not use compressed air, liquid, or metal tools inside the port. Turn off and disconnect the iPhone, then use a dry, soft-bristled brush or lint-free cloth to remove loose debris. If the connector remains loose or the port is damaged, arrange service.

Why does the charging symbol appear, but the battery percentage does not move?

The display may not update immediately, and temperature protection or a paused charging feature can delay charging. Check for a temperature message, restart the iPhone, and review the charging settings under Battery Health and Charging. If it remains connected and unchanged, battery or internal hardware service may be needed.

Can my iPhone charge while it is turned off?

Yes, an iPhone can normally draw power while powered off. A dark display does not necessarily mean the phone is not charging. Wake the display and reconnect the cable; if a known-good setup still produces no charging response, continue troubleshooting.

Will wireless charging prove the charging port is broken?

No. Successful wireless charging only shows that the phone can accept power through that method. It points toward the wired cable, adapter, port, or connected accessories, but it does not identify the exact failed part. Test the wired path with a known-good cable and adapter.

Should I erase my iPhone if it will not charge?

Do not erase the iPhone until you have tried the simpler checks and confirmed your information is backed up. An erase can clear a software conflict, but it cannot repair a damaged cable, port, battery, or internal component. If the phone still will not charge after a clean setup, arrange service.

What this guide is based on

Revision history

  1. Updated and re-checked against sources.
  2. First published.

Did this fix it?

Mixtvnowcom.org editors Editorial team

The Mixtvnowcom.org editors write and check every guide on the site against the manufacturer instructions and official sources it lists, and keep each guide's revision history up to date.

More guides from the editors