On this page

Quick answer

Your Mac is likely not getting power, using the wrong display input, or stuck during startup. Save any open work, check the outlet with a known-good lamp, and reseat the power cable while the Mac is unplugged. Then test the display, disconnect peripherals, and try the built-in restart method for your processor.

At a glance

Time
15–45 min
Difficulty
Easy
You'll need
Power cord, known-good outlet and lamp, flashlight, video cable
Cost
Free for most fixes; a part if one is worn
Works on
Mac desktops and MacBook laptops with Apple silicon or Intel processors
Not covered
Internal repairs, liquid-damage restoration, data recovery, and battery replacement

Why does a Mac fail to turn on?

A Mac that appears dead can be in several different states: it may have no power, power without a usable picture, or power with startup software that has stopped. A startup sound, Apple logo, login window, fan activity, or an image on an external display helps you separate those states. Treat what the computer actually does as more useful than a single small indicator light.

The Mac first needs power through its external connection, and then its startup process must load the operating system. A loose plug, switched-off power strip, interrupted circuit, wrong display input, faulty peripheral, stalled startup item, damaged disk, or failed internal component can interrupt that sequence. A MacBook may also depend on its charger when the battery cannot supply enough power.

When a Mac won’t boot up, the useful question is how far startup gets. If the screen lights, a logo appears, or a startup sound plays, the basic power and startup paths are working. If the Apple logo freezes, try Safe Mode and disk checks. If there is no response at all, begin with power, the display, and external devices before changing any system settings.

Before you start

Power safety: Unplug the Mac from power before you move a cable, inspect a charging port, or handle the power adapter. If you need to inspect a wall outlet or its faceplate, switch off the circuit at the breaker first. Do not remove outlet covers or work on wiring. Internal power, battery, display, storage, and logic-board repairs belong to a qualified technician or an authorized service center.

Liquid and gas safety: Keep drinks and other liquids away from the Mac. If liquid has entered it, do not turn it on or charge it; disconnect power if you can do so safely and arrange service. A Mac has no gas connection to operate. If you smell gas nearby, do not operate electrical switches in the area, do not work on gas lines, valves, or burners, and leave the area to call the gas utility or emergency services.

Have these ready:

  • A known-good wall outlet and a small lamp you know works, so you can test power without opening the outlet.
  • The power cord and adapter supplied with the Mac, plus the cable for any external display.
  • Your backup method and access to your Apple Account and FileVault recovery key if the Mac uses FileVault.
  • A flashlight, an empty USB port for testing one accessory at a time, and a pen for recording diagnostic results.

If the screen works, save your files before restarting or changing settings. Do not erase, initialize, or replace the startup disk while you are still diagnosing the problem.

Step 1 Check the outlet and power connection

Why this helps: A Mac cannot start without power. A loose wall plug, an outlet that has switched off, a tripped circuit, a damaged cord, or an adapter that is not fully seated can all look like a failed computer. This check is the quickest way to rule out an external power problem.

  1. If the Mac responds, save your work and shut it down. If it is frozen, move on to the built-in restart method in Step 4 before disconnecting it.
  2. Unplug the power cable. Test the wall outlet with a lamp you know works, and inspect the outlet face for a loose, dark, warm, wet, or damaged faceplate.
  3. If the Mac was plugged into a power strip, surge protector, or extension cord, unplug it and connect the Mac directly to the wall outlet.
  4. Inspect the power plug, cable, adapter, and socket on the Mac for bent pins, cracks, discoloration, heat damage, or debris. Stop using damaged parts.
  5. Clear only loose, dry debris from the exterior socket with a soft, dry brush. Do not spray cleaner into it, insert metal objects, or push anything past the opening.
  6. Reseat the connector fully. On a MacBook, use the power adapter and charging cable intended for that Mac; a data-only cable cannot charge it.
  7. Plug the Mac in, wait briefly, and press the power button once. Allow the startup process to continue instead of pressing repeatedly.
  8. If the outlet is warm, scorched, buzzing, wet, or loose, stop using it. Switch off the circuit at the breaker if you can do so safely, and have a licensed electrician inspect it.

How to tell if it worked: A startup sound, Apple logo, login window, Recovery screen, or display response confirms that power is reaching the Mac. If a MacBook starts only while connected to power, note that behavior and whether it shows a charge indication. If a known-good outlet and correct cord still produce no response, continue through the checks and plan on service if nothing changes.

Step 2 Verify that the display is showing the Mac

Why this helps: A working Mac can look completely off when the built-in screen is blank, an external display is set to the wrong input, or a video cable is loose. Separating the computer from the display prevents unnecessary replacement of a Mac that only needs a different screen or input.

  1. If you use an external display, turn it on and select the input connected to the Mac. A “no signal” message means the display is powered but is not receiving a usable picture.
  2. Connect the display directly to the Mac when possible. Temporarily bypass a dock, hub, switcher, or adapter because a failed video path can block the startup process.
  3. Move the mouse or press a key to wake the Mac. Adjust brightness on the built-in screen or external display if an image appears but is too dark to read.
  4. Check for fan movement, a startup sound, a responsive trackpad, or activity lights. Do not rely on fan movement alone because a fan may remain quiet under light load.
  5. Reseat the video cable at both ends. If you have another known-good cable or display, test with it to separate a faulty display from a computer problem.
  6. If the MacBook works with an external display but its built-in screen stays black, stop changing startup settings. The built-in display or its connection needs service.

How to tell if it worked: Seeing the Apple logo, desktop, login window, or Recovery screen confirms that the Mac is running. A startup sound with no image points toward the display path; no sound and no other activity point back toward power or an internal fault.

Step 3 Disconnect external devices

Why this helps: An external drive, dock, USB device, or network accessory can interrupt startup before the login window appears. Starting with only the power connection gives you a clean test of the Mac itself and avoids confusing a device failure with a computer failure.

  1. Save your work and shut down the Mac if it responds. Otherwise, unplug it from power and let it sit briefly.
  2. Disconnect external storage, USB devices, Thunderbolt devices, an SD card, a printer, a headset, and any dock or hub.
  3. Disconnect the external display too if you suspect it. Reconnect only the power supply and start the Mac.
  4. Listen for a startup sound, watch for fan movement, and let startup continue. Check both the built-in and external screens.
  5. If the Mac starts, reconnect one device at a time. Turn the device off before connecting it, then wait for the Mac to settle.
  6. If the failure returns, note the last device added. Test that device and cable separately, and do not reconnect a drive that makes the Mac hang.

How to tell if it worked: If the Mac starts without peripherals, the fault is likely an accessory or connection. Leave the suspected device disconnected until you can back up its files and have it checked safely.

Step 4 Restart the Mac without changing settings

Why this helps: A normal restart closes the current operating system state and clears a frozen program, screen, or startup process. Use the built-in restart method instead of repeatedly pressing the power button, which can interrupt startup again.

If your Mac has an Intel processor

  1. Save your work if the Mac responds, then shut it down.
  2. Press and hold the power button until the Mac shuts off, release it, wait briefly, and press it again.
  3. If the Apple logo appears but progress stops, keep the Mac connected to power and allow more time before trying another step.

If your Mac has an Apple silicon processor

  1. Save your work if the Mac responds, then shut it down.
  2. Press and hold the power button until startup options appear. On a Mac laptop with Touch ID, use the Touch ID button as the power button.
  3. Choose Continue to attempt a normal start. Do not choose an option that erases the Mac or reformats a drive.

How to tell if it worked: The Mac has restarted successfully if you reach the login window, desktop, or startup volume chooser. If it freezes at the logo again, move to Safe Mode and the startup disk checks rather than repeating restarts.

Step 5 Start the Mac in Safe Mode

Why this helps: Safe Mode limits startup items and certain software drivers. If the Mac starts there, a recent update, login item, background application, or accessory is more likely than a basic power failure. It also lets you confirm that the display and basic startup path work without the usual software load.

If your Mac has an Apple silicon processor

  1. Start the Mac and hold the power button until startup options appear.
  2. Hold the Shift key, choose Continue, and keep holding Shift until the startup process begins.

If your Mac has an Intel processor

  1. Turn on the Mac and immediately hold the Shift key.
  2. Keep holding Shift until startup begins or the login window appears, then release it.

After Safe Mode starts

  1. Open System Settings > General > Login Items & Extensions. On an older version, look for startup items under System Preferences > Users & Groups.
  2. Disable items added around the time the problem began. Pay particular attention to update tools, security software, disk utilities, and background applications.
  3. Restart normally. If the normal startup works, reconnect external devices one at a time rather than reconnecting everything together.
  4. Do not re-enable all disabled items at once. Add them back in small groups so you can identify the one that causes the failure.
  5. If the normal restart works, install pending macOS updates after backing up. Save your work before the update begins.

How to tell if it worked: Safe Mode that starts but normal startup that fails points to software or an accessory. If Safe Mode also fails, the startup disk or internal hardware needs closer checks.

Step 6 Check the startup disk and run First Aid

Why this helps: Recovery lets you see whether the Mac recognizes its startup disk and can check the disk’s folder structure for errors. It also lets you choose the correct startup volume when more than one is installed. These checks do not erase personal files.

If your Mac has an Apple silicon processor

  1. Press and hold the power button until startup options appear.
  2. Hold the Option key, choose Continue, and look for the startup volume list. Select the volume containing macOS, then continue.
  3. Return to startup options, choose Options, and select Continue to enter Recovery.

If your Mac has an Intel processor

  1. Turn on the Mac and immediately hold the Command and R keys together.
  2. Release them when the progress bar or Recovery screen appears.
  3. If Recovery asks which disk to use, select the startup volume containing macOS, not an external or recovery volume.
  1. Open Disk Utility from the Recovery or Utilities options.
  2. Choose View > Show All Volumes if the internal disk is not listed. The internal drive may appear under a generic name instead of “Macintosh HD.”
  3. Select the internal startup volume, choose First Aid, and run it. If you cannot identify the correct volume, stop rather than changing the wrong disk.
  4. If Recovery asks for the FileVault password or an authorized account, enter it. Use your own recovery key if that is the method you set up.
  5. Restart and try a normal startup again.

Important: First Aid repairs some folder structures, but it cannot replace a failed drive. Do not run write-related repairs on an external disk whose contents are not backed up.

How to tell if it worked: First Aid completion followed by a successful startup suggests a recoverable disk-folder error. A missing internal disk, repeated failure, or disk that cannot be accessed means you should stop and arrange professional service.

Step 7 Run Apple Diagnostics

Why this helps: Apple Diagnostics can check many hardware components and may identify a fault involving memory, storage, power, or an internal connection. A clear result gives you a useful reason to request repair and avoids changing system software that is not the problem.

If your Mac has an Apple silicon processor

  1. Start the Mac and hold the power button until startup options appear.
  2. Hold the Command and D keys together until diagnostics begin.

If your Mac has an Intel processor

  1. Turn on the Mac and immediately hold the D key.
  2. Release it when diagnostics begin.
  1. Keep the Mac connected to power and follow any on-screen instructions.
  2. Record the reference code and the component named in the result so you can provide them to service.
  3. If diagnostics identifies a component, arrange professional repair. Do not open the case to reseat parts yourself.
  4. If no issue is reported, continue with the macOS recovery steps. A result without a reported issue does not rule out every possible fault.
  5. If the Mac restarts instead of showing results, repeat the diagnostic launch once, then arrange service.

How to tell if it worked: A completed diagnostic result either names a component or gives you a reference code. Both are more useful than repeated startup attempts and help service verify the repair afterward.

Step 8 Reinstall macOS from Recovery

Why this helps: Reinstalling macOS replaces damaged system files while leaving personal files in place when you select the correct option. It is reasonable after normal startup and Safe Mode fail, provided Recovery can see the internal startup disk. Do not use this step to erase a Mac whose problem you have not identified.

Enter Recovery

  • On a Mac with Apple silicon, start the Mac, hold the power button until startup options appear, choose Options, and then choose Continue.
  • On a Mac with an Intel processor, turn on the Mac and hold Command and R until Recovery appears.
  1. Confirm that important files are backed up. If FileVault is active, make sure you can enter the startup disk password with an authorized user or your own recovery key.
  2. Choose Reinstall macOS, or Install macOS on a version that uses that label, and follow the prompts.
  3. Select the internal startup volume when asked. Keep your files, and do not choose Erase Mac or Erase Volume.
  4. If Recovery needs an internet connection to download installation files, connect a working network before continuing.
  5. Let the installation finish without forcing a restart. Keep the power connection secure throughout the process.
  6. After installation, restart and reconnect external devices one at a time.

How to tell if it worked: Success means the Mac reaches the desktop and can reopen your applications and files. If installation fails, the startup disk is missing, or personal files do not appear, stop and contact a qualified computer repair professional.

Symptom checker

What you notice Likely cause Fix (step number)
No fan movement, sound, or display response Power is not reaching the Mac 1
Starts when plugged in but not on battery Charger, cable, charging port, or battery 1
Starts normally but the screen stays black Display, input, cable, or dock 2
Works without peripherals External device or dock conflict 3
Apple logo appears, then progress stops Startup software or startup disk 4, 5, 6
Safe Mode starts, but normal startup fails Update, login item, app, or accessory 5
Recovery does not show the internal disk Storage connection or internal fault 6
Diagnostics names a component or code Confirmed hardware fault 7
Reinstall finishes, but startup still fails System damage, storage, or internal hardware 8

Mistakes that make it worse

  • Repeatedly pressing the power button can interrupt a startup that is still progressing.
  • Opening the case to reach the battery, storage, or power components can damage the Mac or expose you to energized parts.
  • Using a data-only cable or the wrong charger makes the Mac appear completely unresponsive.
  • Reconnecting every peripheral at once hides the device responsible for the failure.
  • Choosing an erase option before backing up the files can remove data that cannot easily be restored.
  • Running disk repair commands on the wrong volume can make the original problem harder to recover from.

When to call a professional

  • The Mac remains completely unresponsive with a known-good outlet, the correct power cord, and all peripherals disconnected.
  • A MacBook starts only while connected to power, does not show a charge indication, or has a damaged charging port.
  • The battery looks swollen, the case is bent around the battery, or you notice unusual heat, a chemical odor, smoke, or leaking liquid.
  • The built-in display stays blank while an external display works, especially if the screen flickers, shows lines, or changes on its own.
  • Recovery cannot see the internal startup disk, the disk makes concerning noises, or First Aid repeatedly fails.
  • Apple Diagnostics identifies a component or provides a reference code that service should review.
  • The repair requires opening the case, disconnecting internal cables, replacing internal parts, or working on internal wiring. Have a qualified technician or authorized service center handle it.
  • A wall outlet is scorched, buzzing, warm, wet, or loose. Switch off the circuit at the breaker and have a licensed electrician inspect the wiring; do not replace wiring yourself.

How to keep it from happening again

  • Keep the Mac’s vents and surrounding space clear so heat can move away from the device.
  • Use the correct power adapter and charging cable, and inspect cords for damage before connecting them.
  • Install macOS updates after backing up important files, rather than postponing them indefinitely.
  • Review login items, background applications, and recently connected accessories when performance changes.
  • Keep liquids away from power connections and carry the Mac in a protective case to reduce impact damage.
  • Maintain a current backup so storage failures do not become data-loss emergencies.

Frequently asked questions

Does a Mac need to show a fan or light to prove it has power?

Not always. A fan may stay quiet under light load, and an indicator can be hard to see. A startup sound, Apple logo, display image, or Recovery screen is stronger evidence that the Mac is running.

Why does my Mac work only when it is plugged in?

The charger, cable, outlet, charging port, or battery may be involved. First test the outlet and reseat the correct power connection. If the Mac has no charge indication or will not start on a known-good charger, have the MacBook checked by a qualified technician.

Is a black screen the same as a Mac that has no power?

No. A black screen can mean the Mac is running while the display path is faulty. If you hear a startup sound or the Mac works with another display, focus on the screen, input, cable, and dock.

Can I recover files if the Mac will not boot?

Sometimes. If Recovery can see the startup disk, you may be able to copy important files to another drive before making changes. If the disk is missing, inaccessible, or making concerning noises, stop repeated startup attempts and contact a qualified data-recovery professional.

Should I erase the Mac to fix the startup problem?

Not as a first step. Safe Mode, First Aid, and a macOS reinstallation that keeps your files should come before any erase option. Back up your data first, and if the startup disk is not visible, do not erase anything.

Can I keep using a MacBook that will not start without its charger?

Stop using it if it runs down quickly, becomes unusually hot, or has a swollen or damaged battery. Disconnect it from power if that is safe and arrange service. Do not press on or puncture a swollen battery.

What this guide is based on

Revision history

  1. Updated and re-checked against sources.
  2. First published.

Did this fix it?

Mixtvnowcom.org editors Editorial team

The Mixtvnowcom.org editors write and check every guide on the site against the manufacturer instructions and official sources it lists, and keep each guide's revision history up to date.

More guides from the editors